Camshaft Position Sensor, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Engine Covers

Courtesy of AUDI OF AMERICA, LLC

-- Remove the front engine cover -1-, refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Disconnect the connector -1- on cylinder bank 1.

Fig 2: Camshaft Position Sensor -G40- Connector Location

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -arrow- and the Camshaft Position Sensor -G40-.

-- Disconnect the connector -1- on cylinder bank 2.

-- Remove the bolt -arrow- and the Camshaft Position Sensor 2 -G163-.

Fig 3: Camshaft Position Sensor 2 -G163- Connector Location

Courtesy of AUDI OF AMERICA, LLC