Overview - Front Wheel Housing Liner: Notes

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

For Driveshaft Cover, refer to DRIVESHAFT COVER .

Fig 1: Identifying Front Wheel Housing Liner

Courtesy of AUDI OF AMERICA, LLC

Wheel Housing Liner
- Removing:
  -- Driveshaft cover, removing.
  
  -- Press in front wheel accordingly.
  
  -- Remove the bolts on the lower wheel housing liner.
  
  -- Loosen the retainer on the clips, for example, using a small screwdriver, and slide the clip sideways off the retaining pins.
  
  -- Disengage wheel housing liner from fender and pull downward and out.
- Install in reverse order of removal.
Bolt
- 2 Nm
Clip
- Quantity: 7
  NOTE:
  Replace the clips after removing the wheel housing liner.
Expanding Clip
Wheel Spoiler
Bumper Cover