Rear Final Drive Assembly Overview: Notes
WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2016 Audi S5, 2015 Audi S5, 2015 Audi RS 5, and 2014 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
- Subframe
- Removing and installing, refer to OVERVIEW - SUBFRAME
- Bolt
- 95 Nm
- Bolt
- 55 Nm
- Bolt
- 55 Nm
- Heat Shield
- Bolt
- 20 Nm
- Drive Axle
- Removing and installing, refer to OVERVIEW - DRIVE AXLE
- Rear Final Drive
- Removing and installing, refer to REAR FINAL DRIVE
- Attaching to the assembly stand REAR FINAL DRIVE ASSEMBLY OVERVIEW
- Driveshaft
- Removing and installing, refer to DRIVESHAFT BOLTED ON TRANSMISSION SIDE and DRIVESHAFT ATTACHED ON TRANSMISSION SIDE
- Removing from the rear final drive and installing, refer to DRIVESHAFT FROM REAR FINAL DRIVE
- Crossmember