LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> A5 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 621 (3.0L - Generic Scan Tool - Engine Code(S): CCBA, CGXC & CTUB (General Information - Diagnostic Modes) (Sedan)) >> St Generic Scan Tool >> Diagnosis And Testing >> Diagnostic Modes 01 - 0A >> Diagnostic Mode 08 - Request Control Of On-Board System, Test Or Component

Diagnostic Mode 08 - Request Control Of On-Board System, Test Or Component

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2017 Audi S5, 2016 Audi S5, 2016 Audi S4, 2015 Audi S5, and 2015 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.

Diagnostic Mode 08 is used to control the operation of an on-board system, test or component. A Mode 8 service can be used to turn on-board system ON or OFF, or to cycle an on-board system, test, or component on or off for a specific period of time. The service can also be used to request system status or to report test results.

Test Requirements 

-- No Test requirements are available for this powertrain.

Function Test 

-- No Function Tests are available for this powertrain.

scientia non olet · About LEMON Manuals