Special Tools
WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2017 Audi S5, 2016 Audi S5, 2015 Audi S5, 2014 Audi S5, and 2013 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- -3- Separating Tool 22 to 75 mm, for example, Kukko Separating Tool 12-75 mm Kukko 17/1
- Retainer 3028
- Alignment Fixture - 4W Dr. Shaft 3139
- Puller T10037
- Tensioning Strap T10038
- Puller T10055
- -2- Adapter T10055/2
- Wheel Hub Support T10149
- Counterhold Tool Touareg V10 T10172 with Adapters T10172/5
- Thrust Piece T40108
- Thrust Piece T40109
- Socket XZN 12 T40154
- Guide Sleeve T40222/1
- Hose Clamp Pliers V.A.G 1275
- Engine / Gearbox Jack V.A.G 1383 A with Universal Transmission Adapter V.A.G 1359/2
- Thrust Plate VW 402
- Needle Bearing Drift VW 408 A
- Needle Bearing Drift VW 295
- Needle Bearing Drift VW 295 A
- Puller VW 391
- Support Channels VW 457
- Adapter VW 771/40 from the Slide Hammer - Complete Set VW 771
- Transmission Support VW 785/1 B
- Not illustrated:
- Flanging Tool T40261
- Locking Cap T40262