Rear Three-Point Seat Belt, Removing And Installing, Center Rear Three-Point Seat Belt, Folding Rear Seat Backrest: Removing
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the bench seat. Refer to SEAT BENCH/SINGLE SEAT, REMOVING AND INSTALLING .
-- Remove the right 2/3 rear seat backrest. Refer to REAR SEAT BACKREST, REMOVING AND INSTALLING, DIVIDED REAR SEAT BACKREST .
-- Remove the cover with the padding:
- Refer to BACKREST COVER AND PADDING, REMOVING AND INSTALLING, DIVIDED REAR SEAT BACKREST WITH PASS-THROUGH .
- Refer to COVER AND PADDING, REMOVING AND INSTALLING, REAR SEAT BACKREST WITH REAR SEAT BACKREST FRAME OR STORAGE COMPARTMENT .
Versions with Rear Seat Belt Tensioner Igniter:
WARNING:
- Follow all Safety Precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS .
- Follow all regulations when disposing of pyrotechnic components. Refer to AIRBAG, BELT TENSIONER AND BATTERY CUT-OUT UNITS, STORING, TRANSPORTING AND DISPOSING .
- Before handling pyrotechnic components (for example, disconnecting the connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.
-- Disconnect the connector -4-.
-- To do this, release the connector lock -3- using a small screwdriver -1- and remove the electrical connector -2-.
Continuation for all vehicles:
-- Remove the nut -1-.
-- Disengage the three-point seat belt -2- and remove it.
-- Guide out the seat belt -3-.