Overview - Cover And Padding, Bench Seat Without Center Storage Compartment

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Overview Of Bench Seat Without Center Storage Compartment

Courtesy of AUDI OF AMERICA, LLC

Cover
- Removing and installing. Refer to COVER AND PADDING, REMOVING AND INSTALLING, BENCH SEAT WITHOUT CENTER STORAGE COMPARTMENT .
- Separate the cover from the padding. Refer to COVER AND PADDING, SEPARATING, BENCH SEAT WITHOUT CENTER STORAGE COMPARTMENT
Contour Wire
- pushed into the cover
Cushion
- Removing and installing. Refer to COVER AND PADDING, REMOVING AND INSTALLING, BENCH SEAT WITHOUT CENTER STORAGE COMPARTMENT .
- Separate the cover from the padding. Refer to COVER AND PADDING, SEPARATING, BENCH SEAT WITHOUT CENTER STORAGE COMPARTMENT
Molding
- sewn into cover
- for engaging the cover in the seat bench frame
Clip
- Covered in foam padding
- Only with fabric covers
Seat Bench Frame
Cushion Clip
- Only with leather covers
- For securing the cover to the padding
- Always replace if removed
- Install in same location as before removal
Clip
- Covered in foam padding