Seat Heating Element -Z6- / -Z8-, Removing And Installing, Comfort Seat: Removing
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the cover and padding from the seat pan. Refer to SEAT PAN COVER AND PADDING, REMOVING AND INSTALLING, SEAT PAN WITH SEAT DEPTH ADJUSTER .
-- Disconnect the cover from the padding. Refer to SEAT PAN COVER AND PADDING, SEPARATING, SEAT PAN WITH SEAT DEPTH ADJUSTER .
-- Cut the electrical wire -3- off directly at the old heating element -2-.
-- Cut through the connecting bars -arrows-.
-- Carefully loosen the seat heating elements -D- and -E- from the bonded connection and remove them.
NOTE:
The spacer fabric must not be damaged.
The old seat heating elements -A, B and C- remain on the padding and the new seat heating element is bonded over them.