Driver/Front Passenger Seat Heating Element - Z6- / - Z8-, Removing And Installing, RS Bucket Seat: Removing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Seat Heating Element Remove/Install Components

Courtesy of AUDI OF AMERICA, LLC

-- Remove the seat. Refer to FRONT SEAT, REMOVING AND INSTALLING, RS BUCKET SEAT .

-- Remove seat pan. Refer to FRONT BACKREST, REMOVING AND INSTALLING, BACKREST AND SEAT PAN, RS BUCKET SEAT .

-- Remove the seat pan cover and padding. Refer to SEAT PAN COVER AND PADDING, REMOVING AND INSTALLING, RS BUCKET SEAT .

-- Cut out area -A- with electrical connection wire from old heating element.

-- Pull out old electrical connection wire.

-- Disconnect electrical wire connections to heating elements at seat bolsters at positions -B-.