LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> A5 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 607 (Antilock Brake System (Sedan) (As Of 09.2011)) >> 45 Antilock Brake System >> Removal And Installation >> Front Abs Wheel Speed Sensors >> Installing

Front Abs Wheel Speed Sensors: Installing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Installation is the reverse of removal, with special attention to the following:

-- Before inserting speed sensor, clean hole inner surface and coat speed sensor all-round with Polycarbamide grease G 000 650.

-- Turn the steering completely left and right after installation, making sure the speed sensor wiring has sufficient clearance.

-- Lower vehicle.

scientia non olet · About LEMON Manuals