Vehicle Diagnostic Tester CONNECTING AND SELECTION FUNCTIONS

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Vehicle Diagnostic Tester

-- Connect diagnosis cable connector to data link connector.

Fig 1: Connecting Diagnostic Cable VAS 5051/5A To Diagnostic Connector

Courtesy of AUDI OF AMERICA, LLC

-- Switch tester on.

-- Switch on ignition.

-- Touch the field / the button on the screen: "Guided Fault Finding ".

-- Select in succession:

Brand
Type
Model year
Version
Engine Code

-- Confirm data entered.

Wait until tester has checked all control modules in vehicle.

-- Press the go to button and select "function/component selection".

-- Select "suspension" on the display.

-- Select "brake system" on the display.

-- Select "01-On Board Diagnostic (OBD) capable system..." indicated on display.

-- Select on display "Anti-lock brake system...".

-- Select on display "Function".

Now, all possible functions of the anti-lock brake system installed in the vehicle will be displayed.

-- Select desired function on display.