Left Charge Air Cooling Circuit Radiator, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2017 Audi S5, 2016 Audi S5, 2016 Audi S4, 2015 Audi S5, and 2015 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

Tightening specifications: 4.5 Nm.

NOTE:

Secure all hose connections with hose clamps of the same type as those equipped by the factory.

-- Install the front wheel housing liner. Refer to FRONT WHEEL HOUSING LINER, REMOVING AND INSTALLING .

-- Install the front wheel. Refer to WHEEL BOLT TIGHTENING SPECIFICATIONS .

-- Install the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .

-- Fill with coolant. Refer to FILLING .

NOTE:

All of the coolant must be changed if the radiator was replaced.