Charge Air Cooling Pump -V188-, REMOVING AND INSTALLING: Removing

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2017 Audi S5, 2016 Audi S5, 2016 Audi S4, 2015 Audi S5, and 2015 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Charge Air Cooling Pump -V188-, Clamps

Courtesy of AUDI OF AMERICA, LLC

-- Remove the left front wheel.

-- Remove the left front wheel housing liner. Refer to FRONT WHEEL HOUSING LINER, REMOVING AND INSTALLING .

-- Disconnect the connector -3-.

-- Remove nut -2- and bracket.

-- Clamp the coolant hoses on the Charge Air Cooling Pump -V188- with the Hose Clamps - Up To 25mm 3094.

-- Loosen the hose clamps -1-, remove the coolant hoses and then remove the charge air cooling pump.