LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> A5 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 604 (3.0L - Cooling System - Engine Code(S): CCBA, CGXC & CTUB (Sedan)) >> 19 Cooling System >> Coolant Pump/Thermostat >> Coolant Thermostat, Removing And Installing >> Removing

Coolant Thermostat, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2017 Audi S5, 2016 Audi S5, 2016 Audi S4, 2015 Audi S5, and 2015 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.

-- Drain the coolant. Refer to DRAINING .

-- Remove the supercharger. Refer to SUPERCHARGER, REMOVING AND INSTALLING .

-- Remove the front coolant pipe. Refer to FRONT COOLANT PIPES, REMOVING AND INSTALLING .

NOTE:

Place a cloth underneath to catch any coolant leaking out.

-- Remove the bolts -arrows-.

-- Remove the coolant thermostat with the connections.

Fig 1: Coolant Thermostat And Bolts
GWWA19-10756Courtesy of AUDI OF AMERICA, LLC