Coolant Pump, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2017 Audi S5, 2016 Audi S5, 2016 Audi S4, 2015 Audi S5, and 2015 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
- Tightening specifications: 9 Nm.
-- Clean any oil or grease off the sealing surfaces.
-- Install the ribbed belt pulley for the power steering pump. Refer to OVERVIEW - POWER STEERING PUMP .
-- Connect the coolant hose to the coupling. Refer to Figure.
-- Installing the ribbed belt:
- Refer to RIBBED BELT, REMOVING AND INSTALLING, VEHICLES WITH HYDRAULIC POWER STEERING .
- Refer to RIBBED BELT, REMOVING AND INSTALLING, VEHICLES WITH ELECTRO-MECHANICAL POWER STEERING .
-- Install the coolant pipes. Refer to COOLANT PIPES .
-- Fill with coolant. Refer to FILLING .