Left Coolant Pipes, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2017 Audi S5, 2016 Audi S5, 2016 Audi S4, 2015 Audi S5, and 2015 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.

-- Drain the coolant (refer to DRAINING ) or remove the After-Run Coolant Pump -V51- if equipped. Refer to After-Run Coolant Pump -V51-, REMOVING AND INSTALLING .

-- Remove the Air Conditioning (A/C) compressor. Refer to A/C COMPRESSOR, REMOVING AND INSTALLING .

Fig 1: Identifying A/C Compressor & Bolts

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and the A/C compressor bracket.

Fig 2: Air Conditioning Compressor Bracket Bolts

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows-.

Fig 3: Bolts And Coolant Pipe From Engine

Courtesy of AUDI OF AMERICA, LLC

-- Remove the coolant pipes from the coolant hoses by loosening the hose clamps -1 and 2-.

NOTE:

The installation location is shown with the power steering pump removed.