Front Left Coolant Pipes, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2017 Audi S5, 2016 Audi S5, 2016 Audi S4, 2015 Audi S5, and 2015 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
- Tightening specifications: 9 Nm.
NOTE:
Secure all hose connections with hose clamps of the same type as those equipped by the factory.
-- Fill with coolant. Refer to FILLING .
-- Install the noise insulations. Refer to NOISE INSULATION, REMOVING AND INSTALLING .