Secondary Air Injection Pump Motor -V101-, REMOVING AND INSTALLING: Removing

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2017 Audi S5, 2016 Audi S5, 2016 Audi S4, 2015 Audi S5, and 2015 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Noise Insulation Panels

GWWA10-11071

Courtesy of AUDI OF AMERICA, LLC

NOTE:

When installing, bring all cable ties back to same positions.

-- Remove the front noise insulation -1-. Refer to OVERVIEW - NOISE INSULATION .

Vehicles with Secondary Air Injection Pump Motor --, Version 1

Fig 2: Component Location Of Secondary Air Injection (AIR) Pump Motor -V101-

GWWA26-10531

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -3- from the Secondary Air Injection Pump Motor -V101-.

-- Press the release buttons and remove the secondary air hoses -1 and 2-.

NOTE:

The installation location is shown with the wheel housing lining removed.

Vehicles with Secondary Air Injection Pump Motor -V101-, Version 2

Fig 3: Identifying Secondary Air Injection (AIR) Pump Motor Components

GWWA26-11192

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -2- on the Secondary Air Injection Pump Motor -V101-.

-- Press the release buttons to remove the secondary air injection hoses -1- and -3-.

Continuation for All Vehicles

Fig 4: Identifying Bolts & Front Bumper Cover End Plate

GWWA63-10234

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bumper cover end plate. Refer to Front Bumper .

-- Remove the left and right air intake grille -1-. Refer to Front Bumper .

Fig 5: Release Clamps Arrows And Remove Air Intake Grille

GWWA94-10510

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and remove the secondary air pump.

Fig 6: Identifying Bolts & Secondary Air Pump

GWWA26-10584

Courtesy of AUDI OF AMERICA, LLC

NOTE:

The installation location is shown with the bumper cover removed.