Secondary Air Injection Pump Motor -V101-, REMOVING AND INSTALLING: Installing
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2017 Audi S5, 2016 Audi S5, 2016 Audi S4, 2015 Audi S5, and 2015 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
- Tightening specification: Refer to OVERVIEW - SECONDARY AIR INJECTION SYSTEM .
NOTE:
Replace the O-rings.
-- Install the bumper cover end plate. Refer to Front Bumper .
-- Install the noise insulation. Refer to OVERVIEW - NOISE INSULATION .