Left Exhaust Manifold, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2017 Audi S5, 2016 Audi S5, 2016 Audi S4, 2015 Audi S5, and 2015 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

Tightening specifications. Refer to Figure.

NOTE:

Replace the seal and self-locking nuts.

-- Position the exhaust manifold with the catalytic converter seal and tighten the nuts. Refer to Figure.

Fig 1: Exhaust Manifold Tightening Sequence

Courtesy of AUDI OF AMERICA, LLC

-- Install the engine supports with the left engine mount. Refer to LEFT ENGINE MOUNT, REMOVING AND INSTALLING .

-- Install the left catalytic converter. Refer to LEFT CATALYTIC CONVERTER, REMOVING AND INSTALLING .

-- Install the left front muffler. Refer to FRONT MUFFLER, REMOVING AND INSTALLING .

-- Install the noise insulations. Refer to OVERVIEW - NOISE INSULATION .

-- Install the plenum chamber bulkhead. Refer to OVERVIEW - BULKHEAD .