LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> A5 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 579 (Brake System - Hydraulic Components (Sedan) (As Of 09.2011)) >> 47 Hydraulic Components >> Removal And Installation >> Rear Brakes >> Rear Brakes Guide Pins And Protective Caps >> Removing

Rear Brakes Guide Pins And Protective Caps: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Audi S4, 2013 Audi A4, 2012 Audi S4, 2012 Audi A4, and 2011 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the bolts -1- on the brake caliper.

Fig 1: Brake Caliper, Servicing Overview
GWWA47-0199Courtesy of AUDI OF AMERICA, LLC

-- Remove the brake caliper.

NOTE:

Do not let the brake caliper hang from the brake hose. Secure it to the body with suitable cable ties or wire. Do not support the weight with the brake hose.

-- Remove the protective cap -9- from the nut on the brake carrier.

Fig 2: Brake Caliper, Servicing Overview
GWWA47-0199Courtesy of AUDI OF AMERICA, LLC

-- Remove the guide pins -8- from the brake carrier.

-- Remove the protective cap from the guide pin.