Brake System Vacuum Pump -V192-
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Audi S4, 2013 Audi A4, 2012 Audi S4, 2012 Audi A4, and 2011 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
The construction of the brake system vacuum pump -- depends on the engine.
The electrical brake system vacuum pump -- is switched on by the engine control module depending on the intake line pressure.
- Vacuum Line
- Electrical Connector
- Brake System Vacuum Pump --
- Removing and Installing, refer to BRAKE SYSTEM VACUUM PUMP -V192- .
- Checking, refer to BRAKE SYSTEM VACUUM PUMP -V192-, CHECKING .
- Check Valve
- Removing and Installing.
- Checking, refer to CHECK VALVE, CHECKING .
- Brake System Vacuum Pump -- Bracket
- Removing and Installing, refer to BRAKE SYSTEM VACUUM PUMP -V192- BRACKET .
- Bracket Nut
- 20 Nm