Overview - Rear Final Drive, AUDI A4, A5 Coupe /SPORTBACK/Cabriolet, A6, A7
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2015 Audi S4, 2015 Audi A4 Quattro, and 2014 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
- Subframe
- Removing and installing. Refer to SUBFRAME .
- Bolt
- 95 Nm
- Bolt
- 55 Nm
- Left Drive Axle
- Removing and installing. Refer to DRIVE AXLE .
- Bolt
- 20 Nm
- Heat Shield
- Rear Final Drive
- Removing and installing. Refer to REAR FINAL DRIVE, REMOVING AND INSTALLING, AUDI A4, A5 COUP E /SPORTBACK/CABRIOLET, A6, A7 .
- Additional work after replacing the rear final drive. Refer to REAR FINAL DRIVE, ADDITIONAL WORK AFTER REPLACING .
- Driveshaft
- Removing and installing. Refer to DRIVESHAFT BOLTED ON TRANSMISSION SIDE, REMOVING AND INSTALLING .
- Right Drive Axle
- Removing and installing. Refer to DRIVE AXLE .