Selector Shaft, Removing And Installing: Removing

WARNING: This page is about a different car, the 2013 Audi S4, 2012 Audi S4, 2011 Audi S4, and 2010 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Using Selector Shaft Guide Pin T40216

Courtesy of AUDI OF AMERICA, LLC

-- Remove the Selector Shaft Guide Pins T40216 on the gearshift shaft.

-- Remove the bolts -1- and pry the selector shaft cover -2- off carefully.

Fig 2: Removing/Installing Selector Shaft Cover

Courtesy of AUDI OF AMERICA, LLC

-- Lift the gearshift shaft in direction of -arrow A- and remove it in direction of -arrow B-.

Fig 3: Removing Gearshift Shaft

Courtesy of AUDI OF AMERICA, LLC