Schematic Overview - Transmission
WARNING: This page is about a different car, the 2013 Audi S4, 2012 Audi S4, 2011 Audi S4, and 2010 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
- Clutch Module
- Consists of the pressure plate, clutch disc and dual mass flywheel with transfer plate
- Transmission Housing
- Final Drive Cover
- Right Flange Shaft
- Differential
- With ring gear
- Drive Train
- Pinion with ring gear / differential
- Double Angular Contact Ball Bearing
- Pinion
- Reverse Gear
- 1st Gear
- 2nd Gear
- Transmission Cover
- Output Wheel/Drive Wheel
- Center Differential Housing
- Rear Flange Shaft
- Center Differential
- Output Wheel/Drive Wheel
- 4th Gear
- 3rd Gear
- 6th Gear
- 5th Gear
- Input Shaft
- Output Shaft
- Left Flange Shaft