Securing On Engine And Transmission Holder

WARNING: This page is about a different car, the 2013 Audi S4, 2012 Audi S4, 2011 Audi S4, and 2010 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Engine And Transmission Holder VW6095
Gearbox Support T40206 with T40206/1

Procedure

Fig 1: Securing T40206 To Transmission

Courtesy of AUDI OF AMERICA, LLC

CAUTION:

There is a risk of breaking the transmission housing.

The transmission must be attached with the four bolts -arrows- and the Transmission Holder, otherwise when the gear set is pressed out the transmission housing can break.

-- Attach the Gearbox Support T40206 using the Template Gearbox Support - Drilling T40206/3 to the transmission -arrows-.

-- Lift the transmission using the Shop Crane VAS6100. Refer to TRANSMISSION, TRANSPORTING .

Fig 2: Lifting Transmission With Shop Crane VAS6100

Courtesy of AUDI OF AMERICA, LLC

-- Place the transmission on the Engine And Transmission Holder VAS6095 with the Gearbox Support T40206