Transmission Fluid Level, Checking
WARNING: This page is about a different car, the 2013 Audi S4, 2012 Audi S4, 2011 Audi S4, and 2010 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
Procedure
- The vehicle must be level when checking the transmission fluid level.
-- Remove the transmission fluid filler plug -arrow- to check transmission oil.
- Specified value: The level is correct when the transmission fluid comes up to the bottom edge of oil filler hole.
-- Add transmission fluid, if necessary. For the correct transmission fluid specification.
-- Install the transmission fluid filler plug.
Tightening Specification
| Component | Nm |
|---|---|
| Transmission fluid filler plug | 40 |