Transmission Mount, Removing And Installing: Installing
WARNING: This page is about a different car, the 2013 Audi S4, 2012 Audi S4, 2011 Audi S4, and 2010 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
- Tightening specifications. Refer to OVERVIEW - SUBFRAME MOUNT .
-- Mount the transmission support -3- on the transmission mount -5- and tighten the nut -4- hand-tight.
-- Tighten the lower stop -2- with the bolts -1-.
-- Tighten the nut -4-.
-- Install the transmission support and transmission mount. Refer to TRANSMISSION SUPPORT WITH TRANSMISSION MOUNT, REMOVING AND INSTALLING .