LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> A5 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 522 (Steering (Sedan)) >> 48 Steering >> Sensors >> Steering Angle Sensor -G85-, REMOVING AND INSTALLING >> Removing

Steering Angle Sensor -G85-, REMOVING AND INSTALLING: Removing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Straighten the wheels.

Coil connector with slip ring -1-.

Fig 1: Driver Airbag - Assembly Overview
GWWA69-0454Courtesy of AUDI OF AMERICA, LLC

-- Remove airbag unit and steering wheel. Refer to STEERING WHEEL, REMOVING AND INSTALLING .

- clipped onto the switch for turn signals, high/low beam headlamps and headlamp flasher.

- clipped to the coil ring with slip ring.

WARNING:

The coil ring with slip ring must not be turned when they has been removed.

-- Remove the steering column switch module. Refer to STEERING COLUMN SWITCH MODULE, REMOVING AND INSTALLING .