Left/Right Back-Up Lamp Bulb -M16- / -M17-, Removing And Installing, Led (Sedan Through My 2012): Installing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Tightening specification: 3.5 Nm

Install in reverse order of removal. Note the following:

-- Insert the new bulb in the socket without touching the bulb with bare hands.

-- Slide the large clamping bracket -1- onto the threaded pins on the inner tail lamp and tighten the nut -2-.

NOTE:

When tightening the nut, the clamping bracket wedges itself onto the rear lid.