Part 1 - Headlamp Housing, Bulbs, Control Modules
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Screw
- 1.5 Nm
- Quantity: 3
- Daytime Running Lamp and Position Lamp Control Module
- Left Daytime Running Lamp and Position Lamp Control Module -J860-
- Right Daytime Running Lamp and Position Lamp Control Module -J861-
- Removing and Installing. Refer to LEFT/RIGHT DAYTIME RUNNING LAMP AND POSITION LAMP CONTROL MODULE -J860- / -J861-, REMOVING AND INSTALLING, HID HEADLAMPS FROM MY 2013 .
- Ventilation
- For the headlamp housing
- There are different versions.
- Headlamp Housing Inner Bracket
- Removing and installing. Refer to HEADLAMP HOUSING INNER BRACKET, REMOVING AND INSTALLING, HID HEADLAMPS FROM MY 2013 .
- Screw
- 4.5 Nm
- Screw
- 6 Nm
- Quantity: 2
- Screw
- 1.5 Nm
- Quantity: 3
- Headlamp Power Output Stage
- Only for vehicles with cornering lamps
- Left Headlamp Power Output Stage -J667-
- Right Headlamp Power Output Stage -J668-
- Removing and Installing. Refer to LEFT/RIGHT HEADLAMP POWER OUTPUT STAGE -J667- / -J668-, REMOVING AND INSTALLING, HID HEADLAMPS FROM MY 2013 .
- Front Turn Signal Bulb
- Left Front Turn Signal Bulb -M5-
- Right Front Turn Signal Bulb -M7-
- 12 V, 24 W (F024MD)
- Bulb, replacing. Refer to LEFT/RIGHT FRONT TURN SIGNAL BULB -M5- / -M7-, REMOVING AND INSTALLING, HID HEADLAMPS FROM MY 2013 .
- Housing Cover
- Stationary Cornering Lamp Bulb
- Left Stationary Cornering Lamp -M51-
- Right Stationary Cornering Lamp -M52-
- 12 V, 55 W (H7)
- Bulb, replacing. Refer to LEFT/RIGHT CORNERING LAMP BULB -M51- / -M52-, REMOVING AND INSTALLING, HID HEADLAMPS FROM MY 2013 .
- Impact Screw
- For aligning headlamp housing to contour of chassis
- Must touch lock carrier
- Screw
- 4.5 Nm
- Headlamp Housing Upper Bracket
- Removing and installing. Refer to HEADLAMP HOUSING UPPER BRACKET, REMOVING AND INSTALLING, HID HEADLAMPS FROM MY 2013 .
- Screw
- 4.5 Nm
- Spring Nut
- Housing Cover
- HID Headlamp Bulb
- with integrated ignition coil
- Left HID Headlamp Bulb -L13-
- Right HID Headlamp Bulb -L14-
- 42 V, 35 W (D3S)
- Bulb, replacing. Refer to LEFT/RIGHT HID HEADLAMP BULB -L13- / -L14-, REMOVING AND INSTALLING, HID HEADLAMPS FROM MY 2013 .
- Screw
- 4.5 Nm
- Adjuster
- For adjusting the headlamp housing to the bumper contour
- Headlamp Housing
- At left with Left Daytime Running Lamp and Position Lamp LED Module -L176-
- At right with Right Daytime Running Lamp and Position Lamp LED Module -L177-
- Versions with a Left and Right Front Side Marker Lamp Bulb -M33- / -M34-. Cannot be replaced separately
- Removing and installing. Refer to HEADLAMP, REMOVING AND INSTALLING, HID HEADLAMPS FROM MY 2013 .
- Sealing Frame
- Removing and installing. Refer to SEALING FRAME, REMOVING AND INSTALLING, HID HEADLAMPS FROM MY 2013 .
- Screw
- 1.5 Nm
- Quantity: 3
- HID Headlamp Control Module
- Left HID Headlamp Control Module -J343-
- Right HID Headlamp Control Module -J344-
- Removing and Installing. Refer to LEFT/RIGHT HID HEADLAMP CONTROL MODULE -J343- / -J344-, REMOVING AND INSTALLING, HID HEADLAMPS FROM MY 2013 .