Installed Position and Tightening Sequence
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Installed Position and Tightening Sequence:
-- Install the diagonal brace (-arrow- faces the direction of travel).
-- First tighten the bolts to 5 Nm in sequence -1, 2 and 3- and then tighten them to the final tightening specification. Refer to "SUBFRAME, A5 FROM 09/2007" -item 23 - Bolt.
Tightening specifications. Refer to OVERVIEW - SUBFRAME .