Coolant fan, removing and installing
WARNING: This page is about a different car, the 2009 Audi A4, 2008 Audi A4, 2007 Audi A4, 2006 Audi A4, and 2005 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Removing
- Remove fan shroud → Fan shroud, removing and installing .
- Free up electrical wiring.
- Remove screws - 1 to 5 -.
- Remove coolant fan with control module.
Installing
Installation is in the reverse order of removal, note the following:
- Install fan shroud → Fan shroud, removing and installing .
Torque specifications
| Component | Nm | |
|---|---|---|
| Coolant fan | M5 | 4.5 |
| To fan shroud | M6 | 9 |