Mark connecting rod
WARNING: This page is about a different car, the 2009 Audi A4, 2008 Audi A4, 2007 Audi A4, 2006 Audi A4, and 2005 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of VOLKSWAGEN UNITED STATES, INC.
NOTE:
- Only replace connecting rod as a set.
- Do not interchange connecting rod bearings.
- Before removing, mark allocation of connecting rod and connecting rod bearing caps to each other and to cylinder with paint - arrow
-.