Installing guide frame
WARNING: This page is about a different car, the 2009 Audi A4, 2008 Audi A4, 2007 Audi A4, 2006 Audi A4, and 2005 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
- Replace bolts - 1 to 16 -.
- Place long bolts into inner row of guide frame.
- Tighten bolts for guide frame as follows:
- Tighten bolts - 1 to 16 - to 50 Nm with torque wrench.
- Tighten bolts - 1 to 16 - 90 ° ( 1 /4 additional turn) using a rigid wrench.
- Tighten bolts for sealing surfaces of cylinder block/guide frame - dark hatching in the illustration - to 23 Nm in diagonal sequence.