Intake manifold, removing and installing: Installing
WARNING: This page is about a different car, the 2006 Audi A4, 2005 Audi A4, 2004 Audi A4, 2003 Audi A4, and 2002 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Installation is reverse of removal, noting the following:
NOTE:
- Secure all hose connections using hose clamps appropriate for the model type:
- Always replace seals and gaskets.
- Bolt in intake manifold in diagonal sequence in stages (arrows).
- Replace O-ring at guide tube for oil dipstick and insert guide tube into hole in oil pan (upper part).
See Caution for connecting Telematics battery. Refer to Cylinder head, removing and installing
- Observe safety precautions after connecting battery.
Refer to 27 BATTERY, STARTER, GENERATOR, CRUISE CONTROL .
- Top off coolant. Refer to Filling .