Press bearing inner race from hub

WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installing Separating Device In Notch Between Inner Bearing Ring, Hub And Pretension

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Insert separating device, e.g. Kukko 15-17, in bearing inner race ring groove - arrow - and pretension with spindle.

Fig 2: Pressing Bearing Inner Race From Hub

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Press bearing inner race off from wheel hub.

Light weight wheel hub → Light weight wheel hub