Retaining spring for locking cable, removing and installing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2009 Audi A4, 2008 Audi A4, 2007 Audi A4, 2006 Audi A4, and 2005 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Removing:
- To remove locking cable, slightly lift spring at top - arrow B -.
- Unhook spring at retaining tab - arrow C - and remove toward top.
Installing:
- Insert spring - arrow B - from top and hook in at retaining clip - arrow C -.
- Align spring so that it is seated evenly in groove - arrow A -.