ATF pump shaft seal, replacing

WARNING: This page is about a different car, the 2005 Audi A4, 2004 Audi A4, 2003 Audi A4, and 2002 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Work procedure

ATF pump removed from ATF supply housing → ATF pump and ATF supply housing, removing and installing .

NOTE:

Attach screwdriver only at shaft seal but not at locking washer lying underneath.

Fig 1: Pry Off Shaft Seal Using Screwdriver

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Pry off shaft seal using screwdriver - arrow -.
Check locking washer lying underneath for damage.

Fig 2: Drive In New Shaft Seal To Stop Using Thrust Piece 3295

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Drive in new shaft seal to stop using thrust piece 3295.