Clutch "B" , component overview
WARNING: This page is about a different car, the 2005 Audi A4, 2004 Audi A4, 2003 Audi A4, and 2002 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Some of the depicted components are part of component groups and are not available separately as replacement part .
- Before assembling, check components of clutch "B" for wear and damage → Clutch "B" .
CAUTION:
Illustration depicts current construction version of clutch "B" with waved washer , 2x outer plate and 2x coated plate. Clutch "B" must be replaced on older versions without waved washer and with 3x lining and outer discs each.
1 - Adjustment shim
2 - Cylinder "B"
3 - O-ring
- Replace
4 - Piston "B"
5 - O-ring
- Replace
6 - Plate spring
7 - Split retaining ring
- Bent side at right angle faces dished washer
8 - Waved washer
9 - Outer plate
10 - Coated plate
11 - Thick outer plate
12 - Circlip
- Determining thickness Available circlips - thickness in mm