Sealing ring in intermediate flange for front final drive, replacing: Notes

WARNING: This page is about a different car, the 2005 Audi A4, 2004 Audi A4, 2003 Audi A4, and 2002 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

(Transmission installed)

Special tools, testers and auxiliary items required

Fig 1: Thrust Piece 3404

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Thrust piece 3404

Fig 2: Oil Leak Inspection Opening For Shaft Seal In Drive Pinion And Shaft Seal In Intermediate Flange

Courtesy of VOLKSWAGEN UNITED STATES, INC.

NOTE:

An inspection opening is provided on the left side of the intermediate flange to check for oil leaks (arrow) for the sealing ring in drive pinion and the sealing ring in intermediate flange.
If oil escapes at this oil leak inspection opening, this double sealing ring must be replaced.