Securing spring for locking cable, removing and installing
WARNING: This page is about a different car, the 2005 Audi A4, 2004 Audi A4, 2003 Audi A4, and 2002 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Removing
- Slightly lift spring at top (arrow B) and remove locking cable from shift mechanism.
- Unhook spring (arrow A) at retaining clip (arrow C) and remove toward top.
Installing
- Insert spring (arrow B) from top and hook in at retaining clip (arrow C).
- Align spring so that it is seated evenly in groove (arrow A).
- Slightly lift spring at top (arrow B) and insert locking cable into shift mechanism.