Press ball sleeve into transmission cover
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2007 Audi S4, 2007 Audi RS 4, and 2006 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
- Set ball sleeve in place with inscribed side (thicker wall) facing toward lock pin 2064. To do this, insert smaller dia. of lock pin 2064 in ball sleeve.
- Support transmission cover under bearing mount with thrust ring 2006 A.
Ball sleeve press-in depth Ball sleeve press-in depth in transmission cover