Circlips for input shaft ball bearing, determining: Notes

WARNING: This page is about a different car, the 2008 Audi A4, 2007 Audi A4, 2006 Audi A4, and 2005 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

It is necessary to readjust the input shaft when:

Transmission housing

or the

Input shaft

are replaced.

Special tools, testers and auxiliary items required

Fig 1: 3114/2 Straightening Tool

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Replacement stud (M8 and M10) 3114/2

Fig 2: Press Tube 30-100Identifying Special Tools - Oil Pump/Front Sealing Flange, Drive Chain And Chain Sprocket For Oil Pump, Removing And Installing

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Drift sleeve 30 - 100
Fitting tool T10246
Digital depth gauge e.g. VAS 6087