Gear wheels and synchronizing hubs
WARNING: This page is about a different car, the 2008 Audi A4, 2007 Audi A4, 2006 Audi A4, and 2005 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
- Before installing, clean and heat on a hotplate to 130° C (maximum).
- Press in onto stop when installing so there is no axial clearance.
- The temperature can be measured with temperature tester V.A.G1558, ignition tester V.A.G 1767 or diesel tester V.A.G 1743.
- Note installation position.