LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> A5 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (5-Speed Manual Transmission 01A) >> 35 Manual Transmission - Gears, Shafts >> Pinion and hollow shaft, disassembling and assembling >> Pinion and hollow shaft, disassembling and assembling >> Locking collar assignment to reverse idler gear

Locking collar assignment to reverse idler gear

WARNING: This page is about a different car, the 2004 Audi A4, 2003 Audi A4, and 2002 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Allocation Of Operating Sleeve To Reverse Idler Gear
GW00005409Courtesy of VOLKSWAGEN UNITED STATES, INC.
A Reverse idler gear with chamfer Either locking collar type (with chamfer or high shoulder) can be used for assembly
B Reverse idler gear without chamfer Only locking collars with high shoulder can be used for assembly. Do not use locking collars with chamfer.
scientia non olet · About LEMON Manuals