Coolant pump, removing and installing: Removing

WARNING: This page is about a different car, the 2006 Audi A4, 2005 Audi A4, 2004 Audi A4, and 2003 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Always replace gaskets and sealing rings.
Remove toothed belt completely so that it cannot be damaged by coolant.

Drain cooling system → Cooling system, draining and filling .
Remove ribbed belt → Ribbed belt, removing and installing .
Remove ribbed belt tensioning element.
Remove toothed belt → Toothed drive belt, removing, installing and tensioning .

Fig 1: Removing Bolts Securing Coolant Pump And Coolant Pump

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Remove bolts - arrows - securing coolant pump and remove coolant pump.