LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> A5 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 177 (3.0L - Engine Assembly - Engine Code(S): CCBA (Cabriolet)) >> 10 Engine Assembly >> Specifications >> Fastener Tightening Specifications >> Ground Bolt To Strut Tower - Tightening Specification

Ground Bolt To Strut Tower - Tightening Specification

WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, and 2010 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Disengaging Catches -Arrows A- And Remove Upper Part Of Line Pass-Through -2- Upward -Arrow B-
GWWA10-10856Courtesy of AUDI OF AMERICA, LLC

-- Tighten the ground bolt -1- to 9 Nm.

scientia non olet · About LEMON Manuals