Left Engine Mount: Removing

Fig 1: Identifying Noise Insulation

Courtesy of AUDI OF AMERICA, LLC

-- Remove the noise insulation -1 and 2-. Refer to NOISE INSULATION .

-- Place the V.A.G 1782 under the engine.

Fig 2: Connecting/Disconnecting Coolant Hoses With Hose Clamps

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and move oil cooler to the side with the coolant hoses -1 and 2- still connected.

Vehicles with an After-Run Coolant Pump -V51- 

-- Remove the after-run coolant pump. Refer to After-Run Coolant Pump -V51- and the oil cooler ENGINE OIL COOLER .

All Vehicles 

Fig 3: Identifying A/C Compressor & Bolts

Courtesy of AUDI OF AMERICA, LLC

-- Remove Air Conditioning (A/C) compressor. Refer to OVERVIEW - A/C COMPRESSOR POWER UNIT .

-- Install the 10 - 222 A with T40093/6 on the left and right strut towers, as shown in the illustration.

Fig 4: Mounting 10 - 222 A With T40093/6 On Left And Right Suspension Strut Towers

Courtesy of AUDI OF AMERICA, LLC

-- Attach the 10 - 222 A /11 to the left and right engine lifting eyes.

-- Lightly pretension engine with spindles.

Vehicles with Hydraulic Power Steering 

Fig 5: Identifying Hydraulic Oil Hose Bracket -1- & Nut -2-

Courtesy of AUDI OF AMERICA, LLC

-- Remove the nut -2- and free up the bracket -1-.

All Vehicles 

Fig 6: Identifying Subframe Bolts (Tighten To Specifications)

Courtesy of AUDI OF AMERICA, LLC

-- Remove the left subframe bolt -2-.

-- Disconnect the connector -3- on the left electrohydraulic engine mount solenoid valve -N144-.

Fig 7: Identifying Left And Right Engine Mount Bolts

Courtesy of AUDI OF AMERICA, LLC

-- Remove the left engine mount bolts -1, 4 and 5-.

-- Move the left engine mount retaining plate -2- to the side.

-- Remove the left engine mount.