Oil Pump: Installing

WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, and 2010 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

Tightening specifications, refer to OIL PAN UPPER AND LOWER SECTIONS, OIL PUMP AND OIL COOLER OVERVIEW .

NOTE:

Replace the seal and O-ring.

-- Install oil pump onto the driveshaft and fasten.

-- Install the lower oil pan. Refer to LOWER OIL PAN .

-- Fill the engine oil and check the level. Refer to the ENGINE OIL, FILLING AND CHECKING LEVEL .